V Belt

V Belts

Classical V-Belts are endless belts used in a wide range of applications. These classical v belts have technically good design and are economical for most ordinary drives. Our v belts are anti-static, oil and heat resistant and can be used in applications where belt linear speeds do not exceed 30 meters/sec. We are leading V-Belt manufacturers, exporting various range of v belts, hexagonal belts, narrow v belts and classical belts.

Classical V-Belts and Rubber V Belts come as pre set and fully comply with IS 2494 (Part 1) quality certification standards. Their exceptional operational reliability is the result of the use of high-quality HMLS Polyester cord and Chloroprene in its rubber jacket fabric.

classical belts
Section Code Top Width(mm) Height(mm) Length Range(mm)
Z/M/FHP
10
6
380 - 1220
A
13
8
480-5200
B
17
11
560-11200
C
22
14
900-11200
D
32
19
1900-13700
E
38
23
3000-13700

Maximum Belt Linear Speed – 30 mtrs/sec

Narrow V Belts

Narrow V Belts are especially suitable for drives with high belt speeds and are used in industrial and agricultural machinery. Since they need upto 50% smaller pulley widths than classical sections, this allows for a substantial size reduction in drives. Since most new drives these days use universal pulleys, the industrial v belts can in most cases be replaced with a narrow v belts, thereby achieving better power transmission efficiency that eventually results in a longer belt life.
Narrow V Belts are resistant to temperature and oil and they are antistatic. The belt core, made of high quality HMLS polyester cord and comprising the rubber compression zone, is resistant to intensive compressions and heat stresses while the power transmitting and cord is wrapped in Chloroprene rubber impregnated fabric cover which provides both protection against external influences and uniform friction against the pulleys. Our Narrow V Belts and Rubber V Belts are tolerance-stable manufactured and checked to comply with such exacting length tolerances that the belts can be used in pre set without sorting.
Section Code Top Width(mm) Height(mm) Length Range(mm)
SPZ/3V
10
8
630 - 3000
SPA
13
10
800-4500
SPB/5V
17
14
1200-8000
SPC
22
18
2000-12500

Maximum Belt Linear Speed – 42 mtrs/sec

Hexagonal Belts

Hexagonal Belts are specially designed for convoluted and serpentine belt drive paths with reverse bends. The sudden direction changes in belt travel put unique stresses and demands on the belt carcass and structure and such loads are reliably handled by these anti-static and oil-resistant belts.
Hexagonal Belts have been designed with a new cross-section that keeps the belt perfectly aligned, both laterally and longitudinally, in the pulley groove. These hexagonal v belts use a high quality Polyester tensile member as its core and chlcroprene is used in insulation rubber and is impregnated in the specially woven covering cloth.
Section Code Top Width(mm) Height(mm) Length Range(mm)
BB
17
13
1750-3050

Maximum Belt Linear Speed – 30 mtrs/sec

8V Section Belts

8V section belts are manufactured by experienced team members of our organization in accordance with international industrial standards. Manufactured from anti-static wear resistant cover fabric to ensure proper flexibility and balanced elasticity. We put best available techniques to design these belts which make these perfect to provide effective performance in adverse working conditions also. These can be availed in various thickness and specifications following the precise requirements of clients.

Features:

  • Higher flexibility
  • Uniform belt geometry
  • Longer service life


    8 V Section Belts

    Industrial V Belts

    The industrial V belts offered by us are designed and developed by our expert team members using best available techniques to ensure finest quality and longer life of these products. Owing to their “V” shaped cross-section, these belts are acknowledged as V belts. These are designed with different sides which increase the grip, to help cool the belt and relieve stress as the belt bends around small diameter of the pulleys. These belts are extensively acknowledged for its high strength and high rigidity.

    Features:

    • Excellent rigidity
    • Maximum tension control
    • Drive uniformity

    Applications:

    • Drive alternator
    • Air conditioning compressor
    • Power steering pump
    • Water pump

      Classical V Belts

      Classical V-belts are endless belts used for a wide range of applications providing a technically and economically good design for most ordinary drives. They are antistatic, oil and heat resistant and can be used in an application where belt linear speed does not exceed 30 meters/sec.

      Features:
      • Cover fabrics enhance durability by protecting inner parts.
      • Specially designed cards enhance durability and length stability.
      • Excellent in resistance against heat, ozone, sunlight, weather, and ageing.
      • Safe use is ensured by preventing static electricity.
      • Enhances power transmission efficiency by reducing slip




      Applications:
      • Suitable for all industrial applications, including v-flat drives. They can run on wedge as well as on classical V-belt pulleys. Power ratings achieved by Endura Hi-Tech ‘CORE’ wrapped V-belts are far above than specified in IS 2494 and BS 3790, IP 20.
      Section Code Top Width(mm) Height(mm) Length Range(mm)
      Z/FHP
      10
      6
      380-1220
      A
      13
      8
      480-5200
      B
      17
      11
      560-11200
      C
      22
      14
      900-11200
      D
      32
      19
      1900-13700
      E
      38
      23
      3000-13700

      Maximum Belt Linear Speed – 30 mtrs/sec